Assembly
How to read the hole matrix?
6M6d50 or 6xM6/d50 means 6 screws with a diameter of M6 spaced on a diameter of 50 mm.
Bolt tightening torques:
M6 – 8 Nm / M8 – 16 Nm
When to use distance?
After installing the propeller, the minimum distance between the propeller and the pulley must be 5 mm.
If the distance is smaller, use a spacer.
If the engine is equipped with a head cooling fairing, the minimum distance from the propeller at rest to the fairing cannot be less than 10 mm.
If the distance is smaller, use a spacer.
Propeller tips
Before starting the engine with the fleXer propeller for the first time, check the minimum distance of the propeller tips from the basket elements (e.g. stroboscope, tubes, mesh). The minimum distance from the tip of the propeller at rest to the collision elements is 11 cm in the axis of the flight direction. Depending on the propeller model, the minimum distance may be shorter (consultation required).
Warranty
The warranty for fleXer PPG propeller is issued for 12 months from the date of purchase.
- Warranty does not cover:
- damage caused in transport,
- damage caused by the fault of the user,
- defects resulting from improper use of the product, contrary to its intended use or information contained in the manual,
- attempts to repair or modify the propeller by the buyer or unauthorized service.
- The customer is obliged to deliver the product to Aeroplan.
- The customer sends the parcel at his/hers own expense. COD shipments will not be accepted.
- In the case of sending the product that are not covered by the warranty – due to damage or other defects caused by the user – the product will be returned to the customer at his/hers expense.
- We try to make the support handling time as short as possible. The customer will be informed immediately if the repair time is extended for reasons beyond Aeroplan’s control.
In the case of sending products under warranty, it is necessary to:
- complete the online form in the customer panel on the aero-plan.pl website
- safe packing of the products in order to reach Aeroplan undamaged. The sender is responsible for the products in transport
Maitenance
fleXer propellers are made of carbon fiber which gives them great durability. High rotational speeds of the propellers mean that hitting even very small objects such as sand or stone can damage the blade. If your propeller is damaged, please contact us to analyze the possibility of repair. Note: self-repair may adversely affect the safety of using the propeller. Send a service request here: Service request.
